For your 2007 Chevy Silverado 2500HD Classic the Westin Perfect Match Series Rear Step Bumper # 31013 is made to exact OEM specs so it does have all drilled holes needed to attach to the OEM trailer hitch. view full answer...
I contacted our representative at DeeZee about the Truck Bed Toolbox # DZ6170N. He informed me that the box does NOT include a sliding tray because of how narrow the box is.
However, other DeeZee Toolbox models like the # DZ8170LB includes a plastic tray in the toolbox. The # DZ8170LB will fit the 6-1/2 foot standard bed of the 2007 Chevrolet Silverado. view full answer...
The B&W trailer hitch # BWHDRH25182 does not come with the mounting bracket for a 7-Way trailer connector. A couple of cool 7-Way brackets that I like are the Curt Easy Mount # C58000 and the Draw-Tite box, # 18159. Either one will work with the B&W hitch on your 2007 Chevy Silverado. I have included links to videos on both products for you. view full answer...
If your 2007 Chevy Silverado Classic is a 2500 series, then you can use gooseneck trailer hitch # 9465-34 and it does come with the correct installation kit to install it on your truck. If you have a different series truck, you will need a different hitch/installation kit combo.
I have included a link to the gooseneck hitch main page for a 2007 Chevy Silverado Classic. Just click on the link from the list that represents your truck to see the available options. The hitches come with the... view full answer...
Tekonsha's Prodigy P2 Trailer Brake Controller # 90885 comes with a universal wiring harness for hardwired installations. But if your truck has a factory-installed 7-way trailer socket at the rear bumper then you can use wiring adapter # 3015-P for easy plug-n-play installation.
If you do not have a factory 7-way then you'll also need Hopkins part # HM40975 to complete your installation.
The linked video will help illustrate the install process. view full answer...
The varying heights of the hangers is all designed so that you end up with the leaf springs as level as possible and still end up a desired distance away from the trailer frame.
It may seem odd, but the center hanger will stick down further because the shackle straps that attach to the equalizers make up for the height difference. The equalizer is there so there is movement between the axles going over bumps to help smooth things out.
The # APT1 uses a very flat equalizer so to make up... view full answer...
The 90 degree portion of the EZ Coupler RV Sewer Hose Kit # D04-0115 is a separate piece but the part that fits in the dump station inlet is attached to it. I included a picture showing this close up. view full answer...
The Replacement Truxedo Shur-Bond Velcro Brand Fastener Kit # TX1115174 comes with 2 of the hook-side Velcro fasteners that attach to the truck rails so you will need one kit. The mating (loop) pieces will already be on the tonneau cover. This kit also includes a set of 3 replacement rivets (only 2 are needed, one is a spare). Each of these Velcro strips measure 80-inches long x 1-5/16-inches wide.
We also offer part # TX1115173 for 8-foot beds; these Velcro strips measure 96-inches long... view full answer...
The Replacement Truxedo Shur-Bond Velcro Brand Fastener # TX1115173 that you referenced comes with a quantity of two 1-1/4 inch wide Velcro strips for you to use to replace both sides of your TruXedo Lo Pro QT cover. This comes with everything needed for both sides of your truck like you are interested in doing.
Each strip measures 8 feet long so you should have more than enough. view full answer...
The equalizer that comes in the # APT5 Tandem-Axle Trailer Hanger Kit is part # TREQE1. This eqalizer has a 9/16 inch diameter center and end holes.
The # TREQE34 equalizer comes in the hanger kit # APT3HD. The # TREQE34 does have a 3/4 inch diameter center hole and 9/16 diameter end holes. Two wet bolts are included in the # APT3HD kit for the 3/4 inch diameter center holes on the equalizers. view full answer...